Gratis verzending naar Nederland bij alle bestellingen boven € 150

Skonne
Bespaar € 80,00Vindur 20 Inch Hoogtoerige Industriële Vloerventilator
Beoordeeld met 4,7/5

Vindur 20 Inch Hoogtoerige Industriële Vloerventilator

€ 169,99

€ 249,99

Bespaar € 80,00

incl. btw, excl. verzendkosten

Krachtige luchtstroom van 200 W met 360° kanteling en 3 snelheden — ontworpen voor garages, werkplaatsen en grote ruimtes.

  • Koelt grote oppervlakken
  • 360° kantelregeling
  • 3 snelheidsstanden
  • Staalbouw
Meest gekozen

Verzonden vóór 29 september vanuit ons magazijn

4,7/5 | 26.978 beoordelingen

26.978 beoordelingen · 4,7/560 dagen geld-terug-garantie

Wanneer de warmte oploopt in jouw werkruimte, volstaat een zwakke ventilator gewoon niet. De Vindur 20 Inch Industriële Vloerventilator levert ruwe luchtstroom met hoge snelheid, ontworpen voor de veeleisende omgevingen waar comfort verdiend moet worden – niet zomaar wordt gegeven. Werkplaatsen, garages, magazijnen, bouwplaatsen – overal waar je serieuze koeling nodig heeft, is deze ventilator de uitdaging de baas.

Industriële Luchtstroom Met Hoge Snelheid Die Resultaat Boekt

Aangedreven door een robuuste 200W motor, duwt de Vindur lucht met een indrukwekkende 21,33 ft/s over zijn 20-inch ventilatorbladdiameter, waardoor stilstaande warmte wordt doorbroken en frisse lucht wordt gecirculeerd, zelfs in de grootste ruimtes. Drie selecteerbare snelheidsinstellingen – laag, medium en hoog – laten je precies de luchtstroomintensiteit instellen die jouw omgeving vereist, of je nu werkt op een milde middag of op een snikhete zomerdag.

Gebouwd Voor Ruwe Omgevingen Met Een Strak Industrieel Design

Deze industriële vloerventilator is gemaakt van duurzaam roestvrij staal en is gebouwd om de stoten en eisen van intensief gebruik te weerstaan. Het solide chassis behoudt zijn vorm bij dagelijks gebruik, en met 18,95 lbs (ongeveer 8,5 kg) blijft hij stevig op de grond staan zonder te verschuiven of om te vallen. De strakke, no-nonsense esthetiek past natuurlijk in elke industriële of moderne omgeving.

Precieze Koelregeling Met 360 Graden Kantelen

De volledig verstelbare 360 graden kanteling geeft je de controle over de richting. Richt de luchtstroom recht over de vloer, kantel hem omhoog om warmte uit het plafond te verplaatsen, of richt hem op een specifieke werkzone – de Vindur past zich aan jouw indeling aan, niet andersom. Sluit hem aan met het 5,25 ft (ongeveer 1,6 m) lange netsnoer en je kunt direct aan de slag.

Productkenmerken

  • Diameter ventilatorblad: 20 inch (ongeveer 51 cm)
  • Totale afmetingen: 23,6 inch diameter x 10,24 inch diepte (ongeveer 60 cm x 26 cm)
  • Vermogen: 200W
  • Voltage: 110V
  • Windsnelheid: 21,33 ft/s
  • Snelheidsinstellingen: 3 (Laag, Medium, Hoog)
  • Kantelbereik: 360 graden
  • Lengte netsnoer: 5,25 ft (ongeveer 1,6 m)
  • Gewicht: 18,95 lbs (ongeveer 8,5 kg)
  • Materiaal: Roestvrij staal
  • Afstandsbediening: Nee
  • Timerfunctie: Nee

Stop met vechten tegen de hitte met een ondermaatse oplossing. De Vindur brengt industriële prestaties naar elke ruimte die het nodig heeft – betrouwbaar, krachtig en klaar om net zo hard te werken als u.

  • Diameter ventilatorbladen: 20 inch (ca. 51 cm)
  • Totale diameter: 23,6 inch (ca. 60 cm)
  • Totale diepte: 10,24 inch (ca. 26 cm)
  • Vermogen: 200W
  • Voltage: 110V
  • Windsnelheid: 21,33 ft/s
  • Snelheidsinstellingen: 3 (Laag, Gemiddeld, Hoog)
  • Kantelbereik: 360 graden
  • Lengte stroomkabel: 5,25 ft (ca. 1,6 m)
  • Gewicht: 18,95 lbs (ca. 8,5 kg)
  • Materiaal: Roestvrij staal
  • Afstandsbediening: Nee
  • Timerfunctie: Nee

Verwerking: meestal binnen 1 werkdag.
Levering: 5–14 werkdagen na verzending, met realtime track & trace tot aan je deur.

Elke bestelling wordt verzonden in verstevigde, beschermende verpakking, gemaakt voor breekbare woonaccessoires en verlichting. Komt er toch iets beschadigd aan, dan vervangen we het of krijg je het volledige bedrag terug, zonder gedoe.

Van gedachten veranderd? Je hebt 60 dagen om het terug te sturen (zie onze garantie hieronder); de retourkosten zijn voor jouw rekening. Je wettelijke herroepingsrecht van 14 dagen blijft onverminderd van kracht.

60 dagen geld-terug-garantie. Probeer het in je eigen ruimte, zet het aan, leef ermee. Past het niet bij je, stuur het dan binnen 60 dagen terug en krijg het volledige aankoopbedrag terug (de retourkosten zijn voor jouw rekening, terugnamekosten rekenen we nooit).

1 jaar garantie. Elk stuk is 12 maanden gedekt tegen materiaal- en fabricagefouten: werkt er iets niet meer zoals het hoort, dan repareren of vervangen we het kosteloos. Dit doet niets af aan je wettelijke rechten.

  • Grant G.

    This thing is a beast! Totally recommend it! 🔥

In hun woorden

Uit de beoordelingen van dit stuk.

  • I've tested a lot of industrial fans over the years, and this one stands out for build quality. The three speeds are actually useful, not just marketing. On low it's whisper quiet for a fan this size. Great for my woodworking shop where sawdust is a concern - the sealed motor housing is a smart touch.

    Mylah B.

  • Got this for my husband's workshop and he's gonna love it. Already tested it out and the airflow is no joke. Three speeds give good control depending on the temperature and what he's working on.

    Serena H.

  • Tbh I was skeptical about the price but this fan delivers! My workshop feels ten degrees cooler. The metal construction is solid and the motor runs smooth without that cheap rattling sound!

    Ariana C.

Veelgestelde vragen

Verzending & Levering

Dit vind je misschien ook mooi

Klantbeoordelingen

4,8

48 Beoordelingen

  • Grant G.

    20-1-2026

    This thing is a beast! Totally recommend it! 🔥

  • Jason S.

    31-10-2025

    Customer service was helpful when I called about assembly questions. After three months of daily use in my metal fabrication shop, I'm impressed by how well this holds up. The high velocity setting really does push air across the entire workspace - about 25 feet in my case. It's louder than a residential fan, obviously, but that's expected for industrial grade. The tilt mechanism stays put even after vibration from nearby equipment. Paint finish has held up against oil splatter and cleaning solvents too.

  • Lennon G.

    16-10-2025

    The oscillation feature works smoothly, no jerky movements. I appreciate that the cord is extra long - reaches my outlet without extension cords. The tilt mechanism locks firmly in place too.

  • Mckenzie C.

    5-10-2025

    Quality feels cheaper than expected for this price point. The base wobbles slightly on concrete floors, and the motor hum is louder than expected. It's not terrible, just underwhelming. Disapointed given the price.

  • Enzo B.

    24-8-2025

    Packaging was solid - nothing damaged in transit. My mechanic shop runs hot in summer, and this keeps the bay tolerable. The airflow cuts through humidity better than I expected.

  • Juliana W.

    30-4-2025

    Shipping took about a week, which was reasonable. The fan arrived fully functional and well-protected. My team uses it daily in the warehouse. Great addition to our loading dock area.

  • Alanna A.

    5-4-2025

    It's alright I guess. Moves air fine but the noise level is definately higher than I wanted for my home workshop. Build quality is decent, not amazing. For the sale price it's acceptable.

  • Cora P.

    13-2-2025

    I've owned this for three months now and can speak to its durability. The motor shows no signs of strain even after running 10-hour days. Airflow patterns are consistent and the oscillation doesn't develop that annoying squeak some fans get. The powder-coated finish resists scratches better than painted alternatives I've tried. Height adjustment is smooth and stays locked in place. For the price point, the engineering is solid. It's not silent, but the sound is steady white noise rather than rattling. Good for focus work.

  • Mckenzie L.

    3-1-2025

    Great product. Use daily. Worth it. Already recommending it to my workshop buddies who need serious cooling.

  • Mila W.

    11-9-2024

    After extensive research into industrial cooling solutions for my 600 sq ft workshop, I settled on this model. The high-velocity output is genuinely impressive - I can feel the breeze from 20 feet away. The all-metal construction handles the daily abuse of a working shop, from welding spatter to chemical overspray. It's surprisingly stable even when bumped by equipment. The three-speed control is responsive and the oscillation mechanism has held up perfectly through two months of continuous operation. This is professional-grade equipment that happens to be priced for serious hobbyists.

  • Mary J.

    31-7-2024

    Powerful. Quiet enough. Great buy.

  • Audrey R.

    4-6-2024

    Running this fan twelve hours a day in my carpentry workshop through the summer heat. It sits in the corner and just works without any fuss. The high setting creates enough breeze to keep sweat from dripping into my eyes when I'm sanding. I appreciate the simple design - no unnecessary features to break. The metal construction feels like it will last a decade, and the motor has a proper warranty. It's not the quietest fan, but that's not what I bought it for.

  • Mia W.

    24-5-2024

    Best purchase this year, definately gonna use it every day.

  • Joanna O.

    17-4-2024

    Imo this is the best value industrial fan out there right now. My shop stays comfortable even in July. The build quality exceeds what you'd expect at this price point by a lot.

  • Mabel G.

    8-4-2024

    It's fine for what it is. Moves air as described, but the motor runs hotter than my previous fan. Build is okay. Wouldn't recomend at full price, but on sale it's fair. Shipping box was damaged but the fan itself was fine.

  • Bianca N.

    5-4-2024

    Does exactly what it should. Reliable cooling for my workspace. Happy customer.

  • Kaden C.

    29-3-2024

    Using this in a commercial kitchen environment. The stainless steel blades are easy to wipe down at the end of each shift. Stays clean despite grease in the air. Very practical design for food service.

  • Asher G.

    22-3-2024

    LOVE this! Perfect for my workspace! The industrial look fits my garage aesthetic, and the performance is unmatched. I've had it running daily for a month with zero issues. The high velocity air stream reaches across my two-car garage easily. My neighbors have already asked where I got it. Assembly was straightforward, though the base is heavy so I needed help flipping it over. The adjustable height means I can aim it over car hoods or under lifts. Just what I needed!

  • Mylah B.

    5-2-2024

    I've tested a lot of industrial fans over the years, and this one stands out for build quality. The three speeds are actually useful, not just marketing. On low it's whisper quiet for a fan this size. Great for my woodworking shop where sawdust is a concern - the sealed motor housing is a smart touch.

  • Cassidy E.

    18-11-2023

    After comparing three different industrial fans for my 800 square foot workshop, I settled on this model. The high-velocity output is genuinely impressive - I can feel the breeze from 20 feet away. The all-metal construction handles the daily abuse of a working shop, from welding spatter to chemical overspray. It's surprisingly stable even when bumped by equipment. The three-speed control is responsive and the oscillation mechanism has held up perfectly through two months of continuous operation. Assembly instructions were clear, all hardware included.